Unit test issues with the feedback tool

[Justin Obara]

Hi Antranig,

Thanks for the help. I've created a new branch that uses a custom build of Infusion that was built from your FLUID-5506 branch.
https://github.com/jobara/metadata/tree/FLOE-196-with-FLUID-5506

Thanks
Justin

On Sep 16, 2014, at 12:06 PM, Antranig Basman <Antranig.Basman at colorado.edu> wrote:

> Thanks for this report, Justin - can you make sure that your branch is updated to my pull 559 branch of Infusion, and then I'll take a look later today.
> 
> Cheers,
> Antranig
> 
> On 16/09/2014 10:02, Justin Obara wrote:
>> Hi Antranig,
>> 
>> I wonder if you would be able to provide some assistance on some issues
>> that I'm having with the unit tests for the feedback tool? In trying to
>> write the integration tests for the requestSummary dialog with the rest
>> of the feedback tool I have encountered two issues. The work is
>> currently in my FLOE-196
>> <https://github.com/jobara/metadata/tree/FLOE-196> branch
>> 
>> 1) When I try to verify the requests property of the requestSummary
>> component's model, the modelListener doesn't seem to fire. The requests
>> property is actually hooked up via the modelRelay to a dataSourceValue
>> property which takes in the raw data from a pouchDB instance. The
>> dataSourceValue is being properly updated, but the relay doesn't seem to
>> be triggering. Note that this is only an issue in the tests. The demo
>> appears to be working correctly.
>> 
>> This is a link to the commented out test
>> https://github.com/jobara/metadata/blob/FLOE-196/tests/components/feedback/js/feedbackTests.js#L455-L463
>> 
>> The test configuration for the feedback tool can be seen here
>> https://github.com/jobara/metadata/blob/FLOE-196/tests/components/feedback/js/feedbackTests.js#L36-L77
>> 
>> 2) The other issue is one we talked about in the channel at the end of
>> last week. Basically if both tests trees are run, they seem to be
>> conflicting with each other and causing tests to fail. If the tests are
>> run separately they will pass.
>> 
>> https://github.com/jobara/metadata/blob/FLOE-196/tests/components/feedback/js/feedbackTests.js#L559-L560
>> 
>> You had recommended that I try your FLUID-5506
>> <https://github.com/fluid-project/infusion/pull/559> branch to see if
>> that would solve the problem. I did try it in my branch, but without
>> noticing any changes to the failing tests.
>> 
>> Thanks for your help.
>> Justin
>> 
>> 
> 
> _______________________________________________________
> fluid-work mailing list - fluid-work at fluidproject.org
> To unsubscribe, change settings or access archives,
> see http://lists.idrc.ocad.ca/mailman/listinfo/fluid-work