Design tasks in Jira (Engage Design Iteration 02)

[James William Yoon]

Forgot to mention two things:

1) "engage02" is the tag we're using for this iteration

2) The filter for this iteration can be found by going to Filters (top
right) -> Manage Filters -> Search tab -> doing an empty search, and
finding "Engage Design Iteration 02" on the list

Cheers,
James

On Fri, Jul 3, 2009 at 3:32 PM, James William
Yoon<james.yoon at utoronto.ca> wrote:
> Hello designers,
>
> I've populated our iteration 2 design tasks into Jira. Tona, Muriel,
> and Alistair, I know you have tasks of your own that you've created.
> If you could populate them into Jira, that'd be great. Vicki,
> everything that's under conceptual mapping is shared with you. Kevin,
> I think you were going to explore the experience around the
> implementation and use of our tools on the museum side (is that
> right?).
>
> At the upcoming Tuesday design we'll talk about where we all are with
> our tasks now, and if needed, we can spend time refining our tasks for
> the next bit.
>
> The tasks I put into Jira are as follows (a number of them will pour
> over into the next iteration):
>
> JAMES
> * Review affinity diagram, tease out high-level ideas for tagging,
> mapping, mobile interactions, and social, user contribution, emotional
> goals into a short list of next directions to visit (+ Muriel)
>
> Mobile
> * Talk with Hugues (McCord) to get feedback on mobile wireframes and
> scenario (+ Tona)
> * Talk with Titus (Experius) and Nancy (SI) to get feedback on refined
> post-Hugues conversation mobile wireframes and scenario (+ Tona)
> * Refine wireframes based on feedback (+ Tona, Jacob)
> * High fidelity artifacts view (+ Tona)
> * Work with Jacob, et al. on prototype of artifacts view (collapsable
> panels, etc.) (+ Tona)
>
> Conceptual mapping
> * Go through notes from FEAH brainstorm and tease out "scenarios" and
> ideas with tagging (+ Muriel, Vicki)
> * Read up on tagging: steve.museum, other related museum tagging
> initiatives (+ Vicki)
> * Talk with Jason (MMI) about tagging ideas, schedule follow-ups and
> points of input (+ Jess, Vicki)
> * Write up a 1-2 page report (scenario, GIT, ?) on tagging vision (+ Vicki)
> * Get feedback from advisory board on tagging report (with specific
> instructions for feedback and a deadline) (+ Vicki)
> * Refine tagging report (+ Vicki)
> * Build lo-fi wireframes from write-up (+ Vicki)
> * Conversations with Holly and Robin too (+ Vicki)
>
> Spatial mapping
> * Read up on the use of RFIDs in museums wrt spatial mapping (re:
> McCord RFID resources) (+ Tona, Erin)
> * Start a conversation with DIA wrt to spatial mapping needs and
> envisioning, schedule follow-ups and points of input into design
> process; and articulate into a document to reiterate and refine in
> follow-up conversations (+ Tona, Alison, Erin)
> * Start a conversation with McCord wrt to RFID + spatial mapping needs
> and envisioning, schedule follow-ups and points of input into design
> process; and articulate into a document to reiterate and refine in
> follow-up conversations (+ Tona, Erin)
>
> ERIN
> Spatial mapping
> * Start a conversation with DIA wrt to spatial mapping needs and
> envisioning, schedule follow-ups and points of input into design
> process; and articulate into a document to reiterate and refine in
> follow-up conversations (+ Tona, Alison, James)
> * Start a conversation with McCord wrt to RFID + spatial mapping needs
> and envisioning, schedule follow-ups and points of input into design
> process; and articulate into a document to reiterate and refine in
> follow-up conversations (+ Tona, James)
> * Read up on the use of RFIDs in museums wrt spatial mapping (re:
> McCord RFID resources) (+ Tona, James)
> * Get feedback on existing mapping scenarios (+ Tona, James)
> * Refine/rebuild wireframes based on feedback and RFIDs (+ Tona)
>
> TONA
> Mobile
> * Talk with Hugues (McCord) to get feedback on mobile wireframes and
> scenario (+ James)
> * Talk with Titus (Experius) and Nancy (SI) to get feedback on mobile
> wireframes and scenario (+ James)
> * Refine wireframes based on feedback (+ James)
> * High fidelity artifacts view (+ James)
> * Work with Jacob, et al. on prototype of artifacts view (collapsable
> panels, etc.) (+ James)
>
> Spatial mapping
> * Start a conversation with DIA wrt to spatial mapping needs and
> envisioning, schedule follow-ups and points of input into design
> process; and articulate into a document to reiterate and refine in
> follow-up conversations (+ Erin, Alison, James)
> * Start a conversation with McCord wrt to RFID + spatial mapping needs
> and envisioning, schedule follow-ups and points of input into design
> process; and articulate into a document to reiterate and refine in
> follow-up conversations (+ Erin, James)
> * Read up on the use of RFIDs in museums wrt spatial mapping (re:
> McCord RFID resources) (+ Erin, James)
> * Get feedback on existing mapping scenarios (+ Erin)
> * Refine/rebuild wireframes based on feedback and RFIDs (+ Erin)
>
> Cheers,
> James
>